PRODUCTS

HIWIN Rotating Nut Ballscrews - R1 Series

Features

Compact and high positioning: It is a compact design using nut and support bearing as an integral uint. 45-degree steel ball contact angle make a better axial load. Zero backlash and higher stiffness construction give a high positioning.
Simple installation: It is installed simply by fixing the nut on the housing with bolts.
Rapid feed: No inertial effect produced by the integral unit rotating and the shaft fixed. Can select smaller power to meet the rapid feed requirement.
Stiffness: Have a higher trust and moment stiffness, because the integral unit have an angular contact construction. There is no backlash while rolling.
Quietness: Special end cap design allows steel balls circulating inside the nut. Noise generated by high speed operation lower than ordinary ballscrew.



Apply

Semi-conductor industries
Robots
Wood machines
Laser cutting machines
Transporting equipment


R1 Type
R1
型號 支撐軸承 螺帽 法蘭 法蘭孔 襯套 油孔
基本
動額定負荷
基本
靜額定負荷
D G L C F T t BCD-E BCD-e θ M X d B H A
16-16S2 1299 1826 52 25 44 11.4 68 13 6 60 26 20 M4x0.7P 4.5 33 40 11 2 M4x0.7P
20-20S2 1762 2531 62 30 50 12 78 13 6 70 31 20 M5x0.8P 4.5 39 50 11 2 M4x0.7P
25-25S2 1946 3036 72 36 63 16.5 92 13 6 81 38 20 M6x1P 5.5 47 58 15.5 2 M4x0.7P
32-32S2 3150 5035 80 47 80 21 105 20 9 91 48 25 M6x1P 6.6 58 66 20 3 M6x0.75P
40-40S2 4800 8148 110 62 98 22.5 140 20 9 123 61 25 M8x1.25P 9 73 90 21.5 3 M6x0.75P
Traditional Chinese Simplified Chinese English Japanese
Technical Manual Ballscrew-(C) Ballscrew-(E) Ballscrew-(J)
Installation Guide Installation-(C) Installation-(E)